2017 Cornhusker hopper, 44' 10" x 87 1/2" x 96", White skin, 30" x 52", Aluminum traps with gear boxes, New Black Shur loc roll tarp, install 4 alum braces on each header, silver trim, aluminum kingpin section, subframe and bolster, 28" pin setting. Neway CBX23 Air ride, DISC BRAKES, Mobilith 007 semi-fluid grease in hubs, 14:00 x 22.5 Accuride aluminum wheels, one row of 7 lights per side, one row of 7 lights across front header, snow vent cover in the nose, not on the rear, 4S2M abs, Scale box, dump valve, Right Weigh 250-54-1 gauge that reads out in LBS, Install 5 step on each end slope, install catwalks 30" down from the top of the top, Install full aluminum fenders, Plumb for a scale computer with a 1/4" air line, ends in a quick connector on the nose, PSI tire inflation system set at 100 PSI, Install a tee on the output of regulator box and install tire valve to check tire pressure, Install 1 tee on each hopper side panel, 6" up from the trap frame, also install 1 tee on the front of the front hopper and rear of rear hopper, fastened directly to inside step, Install one large vibrator on each end slope, add a lubricator only, install on drivers side,445/50R22.5, Super singles, Previous Decals on Trailer.